I. PRINCIPLE OF OPERATION
The Model 1700 Dehumidifier may be difficult to access in locations such as attics and crawlspaces, and you may wish to control the moisture level in a specific area, such as a living room or master bedroom. The Model 70 Living Space Control provides you with a convenient, accessible means of turning the Model 1700 Dehumidifier on and off and allows for adjustment of the dryness level set point. The Model 70 Control contains its own sensors that override the Model 1700 main control board sensors when connected and enabled.
II. GETTING FAMILIAR WITH YOUR MODEL 70 CONTROL
See Figures 1 and 2 for a description of the Living Space Control.
Figure 1 – Living Space Control
Mode Buttons – Use to turn Model 1700 Dehumidifier on or off.
LCD Display (see Figure 2)
▲▼ Buttons – Use to raise or lower the dryness level set point from “MORE DRY” to “LESS DRY”.
Figure 2 – LCD Display | Current Room RH |
| (Relative Humidity) |
Status Indicator:
Solid “ON” = Control
is on and dehumidifier is enabled.
Blinking “ON” =
Dehumidifier is running.
“ON” not displayed =
Dehumidifier is off.
Dryness Set Point
Bar Display
“MORE DRY”,
“LESS DRY”, and
Bar Display disappear 10 seconds after final adjustment is made using ▲▼ buttons
III. OPERATING INSTRUCTIONS
BASIC FUNCTIONS
“ON” and “OFF” buttons allow you to turn the Model 1700 Dehumidifier on and off.
▲▼ buttons allow you to adjust the dryness set point from “LESS DRY” to “MORE DRY”.
Room RH (Relative Humidity) is displayed at all times.