Aquatic AI33AIR6634 specifications General Specifications, Electrical Specifications

serenity 33

serenity SERIEs Model # AI33AIR6634 / AI33AIR6634TO (Tub Only)

Deck Width	Chromatherapy
	Located Under
3”
	Fill Spout

1				2
			34”
	24”	23”
Back			47”			Back
Angle						Angle
18˚
						18˚

66 1/4” 34”

25 3/4”

18 3/4”

		Rough-In Plumbing
		Measurements
		8 3/4”
	21 3/4”
19 3/4”
		1 1/2”

SPECIFICATIONS:

General Specifications:

Tub Size	66 1/4” x 34” x 25 3/4”
	168 cm x 86 cm x 65 cm
Bathing Well	47” long
	24” wide
	19” interior depth
Maximum Water Depth	15”
Shipping Weight	183 lbs. / 83 kg
Tub Weight Filled	812 lbs. / 368 kg
Tub Only Weight	96 lbs. / 44 kg
Weight w/Equipment	106 lbs. / 48 kg
Gallons to Overflow	85 gal. / 322 L

Electrical Specifications:

Blower/Heater	1 HP; 10.5 AMP; 120V
Requirement	15 AMP; 120V, separate circuit
	required protected w/ Class A GFCI

This unit is not recommended for shower installations.

Standard equipment:

Air Bath System:

-72 Air Jets

-1 HP Variable Speed Air Blower with 20-Minute Timer

-600 Watt Air Heating System

-Electronic Control Package with wave and pulse features

-Automatic Purge and Dry Cycle with Water Sensors

Aquatic Quality Features:

-Integrally Molded Fast-Fill Waterfall Spout (valves not included)

-Chromatherapy

-Slip Resistant Floor

-Air Channels Lined with Antimicrobial Coating

-Extra Deep and Long Bathing Well

-Pre-leveled ABS Support Base

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

•Comfort Pillow - Oval or Rectangle

•Bolt-On Grab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

•Waterproof Remote Control with infrared sensor and 25’ cord

•Remote Blower Wiring Kit

•Optional Blower Location

•Factory Installed Tile Flange*

•Color Matched Acrylic Skirt

•Premium colors

Fax-On-Demand

Document # 1136

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

* Tile flange cannot be installed on waterfall fill spout side.

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. Aquatic Industries, Inc. assumes no responsibility for preparatory work.

The dimensions needed for site preparation and structure building should be measured from the tub; www.aquaticwhirlpools.com 800.555.5324

June 2008