Aquatic AI7240RHS specifications Hotsoak, HOTSOAK SERIEs Model # ai7240RHS, Specifications

HOTSOAK 54

HOTSOAK SERIEs Model # ai7240RHS

2

1

71 3/8”

SPECIFICATIONS:

Deck Width

3 1/2”

39 1/4”

39 1/4”

	22”
		18 3/4”
20 5/8”

Rough-In Plumbing Measurements

16 1/4”

5 1/4”

General Specifications:

Tub Size	71 3/8” x 39 1/4” x 22”
	181 cm x 100 cm x 56 cm
Bathing Well	44” long
	25” wide
	21 1/4” interior depth
Shipping Weight	194 lbs. / 88 kg
Tub Weight Filled	854 lbs. / 387 kg
Tub Only Weight	106 lbs. / 40 kg
Gallons to Overflow	86 gal. / 326 L

Electrical Specifications:

Pump	1/15 HP; 1.3 AMP; 110V
Heater	1.5 kW; 12.5 AMP; 110V
Requirements	20 AMP; 110V, separate circuit
	required protected w/ Class A GFCI

Fax-On-Demand

Document #1229

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-Dry Pump with 20-Minute Timer

-2 Circulation Portal Covers

-Bath-side On/Off Electronic Button

-”Quiet Pad” anti-vibration pump mount for quiet operation

-2 Arm Rests

-Slip Resistant Floor

-Pre-leveled ABS Support Base

-Heat-bent rigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

•Chromatherapy LED Lighting*

•Comfort Pillow - Oval or Rectangle

•Bolt-On Grab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

•Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

•Optional Pump Location

•Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*This whirlpool will need to be hard wired to the breaker box. Three outlets will be supplied on the whirlpool.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation

and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

100 August 2008