Arcam AVR500 / AVR600 / AV888 manual SAT SAT Device Mode, AV AV Device Mode, Menus

SAT SAT Device Mode

The zDevice Mode button configures the CR102 to control the functions of a satellite receiver. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects SAT as the AVR500/AVR600/AV888 source.

PToggles power between standby and on

0…9	Functions as original remote number key.
PHONO	Selects Tape input on the AVR500/AVR600/

EAV888.

SHIFT + Eselects PHONO input on the AVR500/AVR600/AV888.

TV/AV Toggles between the available inputs on

ryour satellite receiver

SModifies many keys (see individual key descriptions, below)

AUX Selects multichannel (MCH) input on the

HAVR500/AVR600/AV888.

SHIFT + Hselects AUX input on the AVR500/AVR600/AV888.

NET Selects iPOD input on the AVR500/AVR600/

eAV888

SHIFT + eselects network (net) internal input on the AVR500/AVR600/AV888

	Navigate menus.
OK	OK confirms a setting (equivalent to ‘Enter’
	or ‘Select’ on some remotes).

MControls Backup function, if available.

UPerforms same function as on original remote, if available.

DOn some Satellite and Cable set top boxes this key functions as the Guide key to open the EPG (Electronic Program Guide).

@Toggles the mute function.

By default this key operates the AVR500/ AVR600/AV888 Mute

]Channel down

[Channel up

-+ Decrease (–) and increase (+) AVR500/ AVR600/AV888 volume

)Fast rewind

$Starts the playback

&Toggles pause of playback

(Fast forward

! (not used)

#Stop playback

%Start recording

h(not used)

uDuplicates function of RED key for some

(RED) Satellite and Cable set-top boxes

tDuplicates function of GREEN key for some

Satellite and Cable set-top boxes(Green)

oDuplicates function of YELLOW key for some

(Yellow) Satellite and Cable set-top boxes

bDuplicates function of BLUE key for some

Satellite and Cable set-top boxes(Blue)

AV AV Device Mode

The aDevice Mode button configures the CR102 to control the functions of a television or other display device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects AV as the AVR500/AVR600/AV888 source.

PToggles power between standby and on. (Some TVs require you to use a number key to turn them on.)

0…9	Functions as original remote number key –
	usually for channel selection.
Phono	Selects Tape input on the AVR500/

EAVR600/AV888.

SHIFT + Eselects PHONO input on the AVR600/AV888.

TV/AV Toggles between the available inputs on

ryour display device (e.g. TV/AV)

SModifies many keys (see individual key descriptions, below)

AUX Selects multichannel (MCH) input on the

HAVR500/AVR600/AV888.

SHIFT + Hselects AUX input on the AVR500/AVR600/AV888.

	Navigate setup and programme selection
OK	menus.

OK confirms a selection (equivalent to ‘Enter’ or ‘Select’ on some remotes).

MEXIT function on some models.

UFunctionsavailable. as original remote key, if

DDisplay INFO or OSD (On Screen Display) function, if available.

@Toggles the mute function.

By default this key operates the AVR500/ AVR600/AV888 Mute

]Channel down

[Channel up

Decrease (–) and increase (+) AVR500/

-+ AVR600/AV888 volume.

)Toggles TEXT page on/off

$TEXT page off

&Turns Programme-In-Programme (PIP) on, if available

(Activates PIP move, if available

!Activates PIP swap, if available

#Activates PIP freeze, if available

%Activates PIP channel up, if available

hActivates PIP channel down, if available

uDuplicates function of RED key for Text TV

(RED)

tDuplicatesTV function of GREEN key for Text(Green)

oDuplicatesTV function of YELLOW key for Text(Yellow)

bDuplicatesTV function of BLUE key for Text(Blue)

English

E-33