Using your CD player
COMPACT DISC PLAYER
CD192
24 BIT/192 kHz UPSAMPLING TECHNOLOGY
LOADPLAY STOP PAUSE TRACK POWER
� � � � � � | � |
English
POWER 1 |
|
| ||
Press this button to switch the CD player on and off. When first |
| |||
powered up with no CD installed the display shows ‘No disc’. |
|
|
| |
LOAD 2 |
|
|
| |
To install a CD, press LOAD (or OPEN on the remote control). The |
|
|
| |
CD tray opens – it accepts 12cm and 8cm discs. Place the CD in the | TRACK | INDEX | MIN SEC | |
8 | 1 | 52.19 | ||
tray with the label facing uppermost. Press LOAD again (or press |
PLAY, or gently push the tray in 5mm) to close the tray. You will see the total number of tracks and total disc time.
The display returns to ‘0’ after a few seconds. The disc is now ready to play.
PLAY 3
Press to play the CD. To restart from track 1, press STOP and then PLAY.
Make sure your amplifier’s input source selector is set to the correct input.
STOP 4
Press to stop the CD playing. The display shows ‘0’ and the number of tracks.
PAUSE 5
Press to pause the disc (interrupt play). Press PLAY to resume play from the same point.
SEARCH 6
Press to search backwards, or to search forwards for a particular passage within the currently playing track. If the player is in ‘PAUSE’ mode the search is made at high speed with the sound muted.
Press , or PLAY to stop the search action and resume playing.
SKIP TRACK 7
To start a CD with a track other than the first, press or to locate the desired track.
To select another track during play, press or . The track is played automatically after selection.
1 2 3 4 5
6 7 8
CDs with text
Load
You will see the total number of tracks and the total disc time with | TRACK INDEX | MIN SEC |
ANASTACIA |
| |
‘CD TEXT’ illuminated in the display. The artist and album title |
| |
scrolls across the display before returning to show the artist and |
| CD TEXT |
total number of tracks. |
|
|
Play
The track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
Track selection
When a new track is selected, the track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
NOTE: The track title is always displayed when a track is selected, either for playing or programming. The artist is always displayed when the disc is stopped.
1 2 3 4 5
6 7 8 9 10
11 12
CD192