Arcam CD33 manual Technical specifications, Guarantee, On Line Registration, Radio Interference

Technical specifications

Digital to Analogue conversion

High performance 192kHz 24-bit sample rate converter and multiple 24-bit digital to analogue conversion

Laser pick-up	3 beam
Laser wavelength	780nm
Numerical aperture	0.45
Dynamic range (unweighted)	>93dB *
Signal to noise ratio	113dB
Harmonic distortion (0dB, 1kHz)	<0.003% *
Frequency response (±0.2dB)	10Hz–20kHz
Output level (0dB)	2.2Vrms
Output impedance	50Ω
Minimum recommended load	5kΩ

*Using 16-bit, triangular p.d.f. dithered data

Physical

Dimensions	W430 x D290 x H85mm
Weight	6.5kg nett/8.4kg packed
Power consumption	32VA maximum
Digital output connection	75Ω co-axial
	optical TOSLINK
Supplied accessories
	Mains lead
	CR-314 remote control
	2 x AAA batteries
E&OE

NOTE: All specification values are typical unless otherwise stated.

CONTINUAL IMPROVEMENT POLICY

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

RADIO INTERFERENCE

The FMJ CD player is a digital audio device which has been designed to very high standards of electromagnetic compatibility. CD players generate, and can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the CD player and its connecting cables as far from the tuner and its aerials as possible. Connecting the CD player and the tuner to different mains sockets can also help to reduce interference.

EC COUNTRIES -– These products have been designed to comply with directive 89/336/EEC.

USA – These products comply with FCC requirements.

LASER RADIATION

If an Arcam CD player is operated whilst the outer casing is removed, invisible laser radiation could cause eye damage.

Guarantee

WORLDWIDE GUARANTEE

This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee.

THE WARRANTY COVERS:

Parts and labour costs for two years from the purchase date.After two years you must pay for both parts and labour costs. The warranty does not cover transportation costs at any time.

For further details contact Arcam at:

Arcam Customer Support Department,

Pembroke Avenue,Waterbeach, CAMBRIDGE, CB5 9QR, England

Telephone: +44 (0)1223 203203

Fax: +44 (0)1223 863384

Email: support@arcam.co.uk

PROBLEMS?

Always contact your dealer in the first instance.

If your dealer is unable to answer any query regarding this or any other Arcam product please contact Arcam Customer Support on +44 (0) 1223 203203 or write to us at the above address and we will do our best to help you.

CLAIMS UNDER GUARANTEE

This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to the Arcam distributor in the country of residence. It should be sent carriage prepaid by a reputable carrier -– NOT by post. No responsibility can be accepted for the unit whilst in transit to the dealer or distributor and customers are therefore advised to insure

the unit against loss or damage whilst in transit. 7

ON LINE REGISTRATION

You can register your Arcam product on line at:

www.arcam.co.uk