Using your CD player
|
|
|
| E n g l i s h |
|
|
|
| COMPACT DISC PLAYER |
LOAD | PLAY STOP PAUSE |
| TRACK | POWER |
2 8 3 4 5 | 6 | 7 | 1 | |
POWER 1
Press this button to switch the CD player on and off. When first powered up with no CD installed the display shows:
--NO DISC--
LOAD 2
To install a CD, press LOAD (or OPEN on the remote control). The CD tray opens – it accepts 12cm and 8cm discs. Place the CD in the tray with the label facing uppermost. Press LOAD again (or press PLAY, or gently push the tray in 5mm) to close the tray. You will see the total number of tracks and total disc time, for example…
TRACK | INDEX | MIN SEC | 1 | 2 | 3 | 4 | 5 | |
8 | 1 | 52.19 | ||||||
6 | 7 | 8 |
|
|
The display returns to ‘0’ after a few seconds. The disc is now ready to play.
PLAY 3
Press to play the CD. To restart from track 1, press STOP and then PLAY.
SKIP TRACK 7
To start a CD with a track other than the first, press 
or 
to locate the desired track.
To select another track during play, press 
or 
. The
track is played automatically after selection. Pressing 
once returns to the start of the current track. To select the previous
track, press 
twice quickly. To go back two tracks, press 
three times, and so on.
HDCD indicator (CD92 only) 8
The presence of an
CDs with text
Load
You will see the total number of tracks and the total disc time with ‘CD TEXT’ illuminated in the display. The artist and album title scrolls across the display before returning to show the artist and total number of tracks.
TRACK INDEX | MIN SEC | 1 | 2 | 3 | 4 | 5 |
ANASTACIA |
| |||||
| 6 | 7 | 8 | 9 | 10 | |
|
| |||||
|
| 11 12 |
|
|
| |
| CD TEXT |
|
|
|
|
|
Make sure your amplifier’s input source selector is set to the correct input.
STOP 4
Press to stop the CD playing. The display shows ‘0’ and the number of tracks.
PAUSE 5
Press to pause the disc (interrupt play).
Press PAUSE again, or PLAY to resume play from the same point.
SEARCH 6
Press 
to search backwards, or 
to search forwards for a particular passage within the currently playing track. If the player is in ‘PAUSE’ mode the search is made at high speed with the sound muted.
Play
The track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
Track selection
When a new track is selected, the track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
NOTE: The track title is always displayed when a track is selected, either for playing or programming.
The artist is always displayed when the disc is stopped.
The TITLE button turns the text display off.
The text display supports English only.
CD72/92
5
