Arcam FMJ CD37 manual 12V trigger input, Voltage select Remote Optical digital output

English

12V trigger input

This socket allows the CD37 to be switched on remotely by an amplifier (or another item of AV equipment) with a 12V Trig out function.

Power inlet		�����������������
		��
		��������
Connect the correct	�������������	�������	����
mains cable here.�����������		������
		��
��������������������	����������
	��������

Voltage select		Remote in		Optical digital output
Ensure the voltage
	selected matches	This allows remote-control signals	Use this socket if you are using a
the local power supply.		to be received by the CD37 if	separate DAC or digital recorder with
		the remote sensor is covered	an optical connection. Connect using a
		(or otherwise not ‘visible’ to the		suitable optical cable.
		remote-control).
		See page 7 for more information.			Coaxial digital output
			Use this socket if you		are using a separate digital
			to analogue converter (DAC) or digital recorder.
			Connect to the DAC or recorder’s digital input
			using a suitable 75Ω screened cable.
			CAUTION: Never connect the digital output
			socket to a conventional audio input.

�������������������

�

�

� �

Analogue audio outputs

Connect these to your amplifier’s CD (or other line-level) input using suitable high quality interconnect cables. Ensure that the left and right audio outputs from the CD player are connected to the same left and right inputs on your amplifier.

The second set of sockets can be used to connect to a second amplifier set up for multi-room use.

E-5