| ����� | ���������� |
| |
���� | �� | ���� | ������������������� | |
������� |
| ���� | ||
| � | � � � � |
������������������������� | 20 |
operation
���� | ���� | ���� | ����� | ����� | ����� |
Front panel operation
These functions can also be controlled by the CR90 remote control. (See pages
Power
Press the front panel Power button (or 2 on the remote) to switch the CD player on and off. The CD37 initializes and (with no CD installed) displays:
�������
Load
To install a CD, press LOAD (or 1 on the remote). The CD tray opens – it accepts 12cm and 8cm discs. Place the CD in the tray with the label facing uppermost.
Press LOAD again (or or 1 on the remote, or gently push the tray in 5mm) to close the tray. The total number of tracks and total playing time for the disc are displayed.
����
�����
����
� � ��� ��� �
The disc is now ready to play.
Play
Press the front panel Play button (or 4 on the remote) to play the CD. To restart from track 1, press STOP and then PLAY.
Make sure your amplifier’s input source selector is set to ‘CD’.
Stop
Press the front panel Stop button (or < on the remote) to stop the CD playing. The display shows the number of tracks and the total playing time for the disc.
Pause
Press Pause (or ; on the remote) to pause the disc (interrupt play). Press PLAY or pause to resume play from the same point.
Shuffle play
Press SHUFF on the remote to play tracks in random order (Shuffle On is briefly displayed). Press SHUFF again to restore sequential playing order (Shuffle Off is briefly displayed).
Search (7 8)
Press and hold 7 to search backwards, or press and hold 8 to search forwards, for a particular passage within the currently playing track. If the player is in ‘PAUSE’ mode the search is made at high speed.
Skip Track (0 /)
To start a CD with a track other than the first, press5 or 6 on the remote to locate the desired track, then press 4 to play.
To select another track during play, press 0 or / on the front panel or remote. The track is played automatically after selection.
