Activate/deactivate the mute lines (0x1F)
Activate/deactivate the mute lines on the designated zone.
Example
Command/response sequence to activate the mute relays:
Command: | 0x21 0x01 0x1F | 0x01 | 0x0D |
Response: | 0x21 0x01 0x1F | 0x00 | 0x01 0x0D |
COMMAND:
Byte: | Description: | |
St | 0x21 |
|
Zn | Zone number | |
Cc | 0x1F |
|
Data1 | 0x00 | – Deactivate mute line |
| 0x01 | – Activate mute line |
Dl | 0x01 |
|
Et | 0x0D | |
RESPONSE: |
|
|
Byte: | Description: | |
St | 0x21 |
|
Zn | Zone number | |
Cc | 0x1F |
|
Ac | Answer code | |
Dl | Data length <n> | |
Data1 | Relay state | |
Et | 0x0D | |
Report Amplifer temperature status (0x27)
Report the temperature status of the various zones amplifiers.
Example
Command/response sequence to request the temperature of zone 1 where temperature is too high:
Command: | 0x21 0x01 0x27 | 0x01 | 0xF0 0x0D |
Response: | 0x21 0x01 0x27 | 0x00 | 0x01 0x01 0x0D |
Note: As each amplifier powers a pair of zones (1&2, 3&4 , 5&6) the temperature status of zones 1 and 2 is the same value.
COMMAND:
Byte: | Description: | |
St | 0x21 |
|
Zn | Zone number | |
Cc | 0x27 |
|
Dl | 0x01 |
|
Data | 0xF0 – Request temperature status | |
Et | 0x0D | |
RESPONSE: |
|
|
Byte: | Description: | |
St | 0x21 |
|
Zn | Zone number | |
Cc | 0x27 |
|
Ac | Answer code | |
Dl | 0x01 |
|
P2 | 0x00 | – Temperature OK |
| 0x01 | – Over temperature |
Et | 0x0D | |
16
