Installation P35 and P1 power amplifiers, Mono Link P35

Installation: P35 and P1 power amplifiers

VOLTAGE

SELECT

230V

POWER INLET

VOLTAGE

SELECT

230V

POWER INLET

	+ R/CH1 –		+ L/CH2 –
			SP2
		4 – 16 OHMS		AUDIO	LINK
					LINK
TRIG				L
OUT				L
			SP1	R
REMOTE				R
IN	+ R/CH1	–	+ L/CH2 –
	+ R/CH1	–	+ L/CH2 –	IN	OUT
				IN	OUT

	SPEAKERS
	+	–
TRIG	REMOTE		AUDIO			BALANCED AUDIO
OUT	IN		IN	P1	XLR
				ARCAM	PHONO
	+	–	OUT	GAIN	XLR/	OUT	IN
	4 – 16 OHMS		OUT		PHONO	OUT	IN
	4 – 16 OHMS

Positioning your power amplifier

<Place your amplifier on a firm, level surface.

<Avoid placing the unit in direct sunlight or near sources of heat or damp.

<Ensure adequate ventilation. Do not place the your amplifier in an enclosed space, such as a bookcase or cabinet, as both of these will impede air-flow through the unit (which is necessary for cooling).

In most situations, there are two choices for getting signals from the P35 to the speakers: the P35 can be situated remotely from the speakers and longer speaker cables used, or the P35 can be situated locally to the speakers by using longer line-level cables (from the pre-amplifier). Over long distances (5m+), the sound quality will generally be better using the low-current line-level (pre-amplifier) cabling than high-current speaker (post-amplifer) cabling, due to otherwise high losses in the speaker cabling.

Connecting to other equipment

The P35 and P1 amplifiers provide the following connections:

AUDIO IN (P35)

AUDIO IN and BALANCED AUDIO IN (P1)

Connect the output sockets of your pre-amp. (or the PRE OUT sockets of an integrated amplifier) to one of these inputs. Please read the information on page 5 “Power-amplifier connections”, which details the type of connection that should be used.

Mono Link (P35)

The P35 can be adapted to provide two mono loudspeaker outputs from a single input. Pull out the link supplied on the back panel (labelled ‘link’) and use it to connect the L and R AUDIO OUT sockets together. Using one power amplifier per loudspeaker will enable you to bi-amplify bi-wireable loudspeakers (as described on the following page).

Follow the instructions given below for bi-wiring, using the SP2 connections of the P35 for the high- frequency speaker and the SP1 connections for the low-frequencies. See also the section on “Remote switching”.

Input Selector Switch (P1)

The mono link fitted

This switch allows either unbalanced signals (through the phono connector) or balanced signals (through the XLR connector) to be selected. The switch should be pressed-in to select the phono inputs and out to select the XLR connector. Note that only one type of input connector will be switched to the input of the amplifier; if you select (for example) the XLR connector, then you will not be able to hear signals connected to the phono inputs.

C31/P35/P1

E-10

C31, P1 specifications

Arcam P1 and C31 are two essential components within the Arcam product line, known for their exceptional audio performance and advanced technologies. Both units are designed to cater to audiophiles and home theater enthusiasts, providing a blend of power, clarity, and versatility.

The Arcam P1 is a powerful class AB power amplifier that is engineered to deliver an impressive audio experience. With a power output of around 120 watts per channel into 8 ohms, it is capable of driving a wide range of speakers with ease. The P1 utilizes advanced circuitry and high-quality components to ensure low distortion and high fidelity. Its high current capability ensures that it can handle dynamic audio passages, making it suitable for both music and cinematic experiences.

One of the standout features of the P1 is its ability to integrate seamlessly into any audio setup. With multiple input options, including balanced XLR and unbalanced RCA connections, the amplifier can accommodate a variety of source components. Moreover, its compact design allows it to easily fit into a home theater rack without occupying unnecessary space.

The Arcam C31, on the other hand, serves as an advanced audio preamplifier and processor. It is designed to handle digital sources, providing a wealth of connectivity options, including HDMI inputs, DAC capabilities, and digital audio outputs. The C31 employs cutting-edge digital audio processing technologies to enhance sound quality and support high-resolution audio formats. It even supports various streaming protocols, allowing users to effortlessly access their digital music libraries.

Another key characteristic of the C31 is its intuitive user interface, which makes navigation through the numerous features straightforward. The device is equipped with a remote control, enabling users to adjust settings without having to physically interact with the unit. The C31's flexibility makes it an excellent choice not only for traditional home theater setups but also for modern, multi-room audio systems.

Together, the Arcam P1 and C31 create a formidable audio partnership that delivers stunning performance across various listening environments. Their combination of power, advanced technology, and user-friendly design makes them must-have components for anyone seeking to elevate their audio experience. Arcam’s commitment to quality and innovation is evident in these products, ensuring that users enjoy the best in sound reproduction.

Arcam C31 manual Installation P35 and P1 power amplifiers, Positioning your power amplifier

Models: C31 P1