![specifications](/images/new-backgrounds/192185/19218531x1.webp)
specifications
| A38 | P38 |
Continuous power output |
| |
Both channels, 8Ω, | 100W | 100W |
Single channel, 8Ω, | 150W | 150W |
Both channels, 4Ω, | 140W | 140W |
Single channel, 4Ω, at 1kHz | 200W | 200W |
Harmonic distortion, 80% power, 8Ω at 1kHz | 0.005% | 0.005% |
Inputs |
|
|
Phono input (optional module): |
|
|
Input sensitivity | 2.7mV (MM); 270µV (MC) |
|
Input impedance | 47kΩ (MM); 300Ω (MC) |
|
Signal/noise ratio (CCIR) |
| |
Overload margin | 35dB |
|
Line inputs: |
|
|
Nominal sensitivity | 800mV | |
Input impedance | 10kΩ | 10kΩ |
THD+n (1kHz, 0dB signal, measured 20Hz to | ||
20kHz unweighted) |
|
|
Power amplifier input |
|
|
Nominal sensitivity | 800mV | 800mV |
Input impedance | 22kΩ | 22kΩ |
Gain | 31.5dB | 31.5dB |
Preamplifier output |
|
|
Nominal output level | 700mV |
|
Maximum output level | 2.6V RMS |
|
Output impedance | <50Ω |
|
Headphone output |
|
|
Maximum output level into 600Ω | 1.6V rms |
|
Output impedance | 4.7Ω |
|
General |
|
|
Mains voltage | 115V or 230V | 115V or 230V |
Power consumption (maximum) | 800VA | 800VA |
Power consumption (standby) | 2VA | 2VA |
Dimensions W x D x H (including feet) | 430 x 370 x 110mm | 430 x 350 x 110mm |
Weight (net) | 9.3kg | 9.5kg |
Weight (packed) | 12.2kg | 12.5kg |
Supplied accessories | mains lead | mains lead |
| CR90 remote control |
|
| 4 x AAA batteries |
|
E&OE |
|
|
NOTE: All specification values are typical unless otherwise stated. |
|
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.