Archos AV 700 13.2 Recording Procedure , 13.2 Recording Procedure

51
51
If you are using the optional multi-connect adapter (can be purchased from the ARCHOS™ web site) and an
AV cable, you should plug the AV cable into the AV In side of the adapter, and then plug the adapter into the
AV 700.
52
52
13.2 Recording Procedure
13.2 Recording Procedure
Before the actual audio recording begins, there is a pre-recording screen which will allow you to adjust your
recording settings.
1. On the main screen, select AudioCorder then click on ENTER.
2. In the pre-recording screen, adjust the recording level* by clicking
on the LEFT and RIGHT buttons. Click on the record action icon (or
Enter button) to start recording. Attention, the fi rst time recording you
should adjust your Settings .
* You should try some test recordings before deciding on which recording level gives the best sound quality. Don’t be
tricked by the volume of the headphones which can be adjusted independently with the UP and DOWN buttons.