Archos AV 700 15.2 Viewing a slideshow , 15.3 Transferring photos to your AV 700

15.2 Viewing a slideshow

By clicking on the action icon Play a Slideshow , the AV 700 will

present each picture in the current folder for a set amount of time

and then go on to the next picture. You can set the amount of

time that each picture stays on the screen under the action icon

Photo Browser Settings > Picture Pause . This parameter is the

number of seconds each picture displays on the screen.

15.3 Transferring photos to your AV 700

The AV 700 is equipped with a USB host port. This port, along with the USB Host adapter cable will allow you

to connect USB Mass Storage Class (MSC) devices to your AV 700 and transfer ﬁ les from that device to your

AV 700. Many cameras produced today are MSC type devices. Thus you can often plug your camera directly into

the AV 700’s USB Host port and copy your photos with the ARCHOS™ browser. If you do not have an MSC type

camera, you can use a USB card reader and plug this into AV 700’s USB host port (via the USB host adapter

cable). Finally if neither of these solutions is available to you, you can always copy the photos to your computer

and then copy them from your computer to the connected AV 700.

3 methods to copy photos to your AV 700

1) Connect your Mass Storage Class camera to USB Host port (via USB host adapter cable).

2) Use a stand alone USB card reader with the USB host adapter cable.

3) Copy photos to your computer and then copy (or Sync with Windows Media® Player 10) to the AV 700.

Once you plug an MSC type device into the USB host port (via the

host adapter cable), the browser’s left panel will show the contents of

your external USB device, and the right panel will show the contents

of your AV 700’s hard drive. Navigate to the panel which contains

your photos (in this example /DCIM/113CANON ). Move to the right

panel (action) and navigate to the folder you would like to save your

photos to (you can create a new folder if you need to by selecting the

corresponding action icon). See the screen images.

Method 1

Photos from camera are shown on the left, and your AV 700

hard drive on the right. By using the Select right pane action

icon, move to the right pane and choose the destination folder.

Now return to the left pane and choose the Copy all ﬁ les action

icon. Your ﬁ les will be copied to your AV 700, into the folder in the

right pane. You can now unplug the camera from the AV 700.