......Door
F_gu_ 2
FRONT FIXED CASTER INSTALLATION
•Locate and align fixed caster (with brake lever facing front of unit - see Figure 3) over the same mounting holes from front brackets in Figure 1 using six hex screws (3 for each caster). Secure the screws snug using a 3/8" open end wrench. Repeat the same procedure for opposite corner. DO NOT OVERTIGHTEN.
REAR SWIVEL CASTER
INSTALLATION
•Remove and discard the screws shown in Figure 4 from each bottom corner using a 5/16" socket wrench.
Locate and align swivel caster over the holes and install with two hex screws. Secure the screws snug using a 3/8" socket wrench. DO NOT OVERTIGHTEN.
•On the opposite side of the swivel caster plate, insert two carriage bolts through the compressor support rail and swivel caster plate. Use a lock nut on each bolt and tighten securely using a 9/16" socket wrench.
See Figure 5.
•Repeat the same procedure for the opposite rear corner.
With the help of an assistant, carefully upright the unit. Reassemble rear access guard with screws.
CAUTION
Ua_ wHi roll fetwa_ a_ it _ Upped ap=
Figure 3
Fmgur÷ 4
Figure 5
Appliance Placement
Leave a one (1) inch space on all sides and the back of the cabinet for ease of installation, proper air circulation and electrical connections. DO NOT block
the front grill on the lower front of your appliance. Sufficient air circulation is essential for the proper
4