Clifford GP500 manual ACG-2 Anti-CodeGrabbing, Automatic remote control low-battery warning

ACG-2™ (Anti-CodeGrabbing 2™)

Clifford’s ACG-2 protects your motorcycle from thieves’ remote control “cloning” devices that are used to record the disarming code transmitted from your remote.

Automatic remote control low-battery warning

If your remote control battery is very low, you will hear five rapid chirps when you disarm rather than the single chirp that you normally hear.

Remote control battery replacement

Any Authorized Clifford Dealer will be happy to replace a remote control battery for you without cost provided you purchase the replacement battery at their shop (it’s also a good idea to keep a spare battery on-hand just in case).

1.Insert a small, thin screwdriver blade in the slot near the keyring opening (you may leave the keyring in place) and turn it to separate the two halves.

2.Remove the old battery noting the + and – indications and replace it.

3.Put the enclosure back together by first aligning the top of the remote, then snapping the case back together at the bottom.

6 GP500