![](/images/new-backgrounds/1254254/25425435x1.webp)
Smart prior intrusion attempt alert
If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you turn on the ignition (or start the engine), the LED will flash
Eight-Event TotalRecall™
Your GP500 system’s memory records the identity of the last eight activated or malfunctioning triggers and sensors in reverse chronological order, which allows your installer to instantly track down malfunctions.
1.Remotely arm and disarm while pressing and holding the unmarked button on the PlainView 2 switch.
2.The LED will flash
3.Write down the number of flashes between pauses and refer to the chart on the previous page.
16 | GP500 |