Argus Camera DC3550 manual FAQ Frequently Asked Questions

FAQ (FREQUENTLY ASKED QUESTIONS)

The software will display the following messages after performing system detection with DSC in various operation modes

		Description of On-screen	Time Point of Software	Action Response after
NO.	On-screen Message	Message	detection	detection	Possible Reasons
				Shut down in a few
1	SRAM ERROR		Detect when starting up	seconds	SRAM fails to read data
				ERROR Warning displays
2	TIMER NOT TICK	TIMER does not work	Detect when starting up	when it is set up	REAL TIME system failure
				Shut down in a few
3	EEPROM ERROR		Detect when starting up	seconds	EEPROM read/write failure
					CF CARD over 256M is
4	MEDIA NOT SUPPORT	Media is not supported	Detect when starting up	Key failure	not supported
	FORMAT REQUIRE GO TO				CF CARD over 32M is
5	SETTING MODE		Detect when starting up	Key failure	required to FORMAT
					Protected files can not be
		Write function is			deleted; You must set up
6	WRITE PROTECT	protected	Detect when deleting	Delete action failure	Release PROTECT firstly
					The initial value of lens
		The initial value of Lens			had not been defined in
7	LENS INIT ERROR	is not set up correctly	Detect when starting up	Key failure	the software
		Data is not compressed	Detect when fetching		Compress data failure;
8	COMPRESS REEOR	correctly	data	Compress action failure	Please reset it.
				Key failure when reading
9	NO CARD	CF card is not inserted	Detect when starting up	data	CF CARD is not inserted
10	MEDIA ERROR	Media failure	Detect when starting up	Key failure	CF CARD Failure

76