Argus Camera DCM-099 manual Operating the Camera, Taking Photos, Sleep Mode, Timer Mode

Models: DCM-099

1 18
Download 18 pages 13.74 Kb
Page 9
Image 9

Operating the Camera

Taking Photos

This is the default mode when you turn on the camera. Press the shutter button. You will hear a beep and camera takes a photo. The number displayed on the LCD screen will decrease by one. If the brightness is too low, the camera will beeps twice indicating insufficient lighting.

Sleep Mode

The camera goes into sleep mode automatically after 30 seconds of inactivity. If it is not connected to a computer via the USB cable, you can manually turn it to sleep mode by pressing the MODE button until “ ” is shown on the LCD screen. Press the shutter button to confirm.

Timer Mode

Press the MODE button until the LCD screen displays “ .” Press the shutter button and the camera counts down for 10 sec. followed by short beep then gives off a long beep before taking a photo.

9

Page 9
Image 9
Argus Camera DCM-099 manual Operating the Camera, Taking Photos, Sleep Mode, Timer Mode