Settings (Con’t)
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
1 In Stop mode, press the MENU button.
2 Press the Cursor 
button to move to <Audio> and then press the ENTER button. 3 Press the Cursor 
button to move to <TEST TONE> and then press
the ENTER button.
The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order.
If the ENTER button is pressed again at this time, the test tone will stop.
Press the RETURN button to return to the previous level.
Press the MENU button to exit the setup screen.
ENG
Setting the Audio
You can adjust the balance and level for each speaker.
1 | In Stop mode, press the MENU button. | |
2 | Press the Cursor | button to move to <Audio> and then press the ENTER button. |
3 | Press the Cursor | button to move to <SOUND EDIT> and then press |
| the ENTER button. |
|
4 | Press the Cursor | , button to select and adjust the desired item. |
| Press the Cursor | , button to adjust the settings. |
Press the RETURN button to return to the previous level.
Press the MENU button to exit the setup screen.
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Alternative method: press the TEST TONE button on the remote.
Press the SOUND EDIT button and then press the Cursor 
, 
button.
Press the TEST TONE button. | |
| |
| ■ Test tone will be produced as follows: |
| When playing a DVD or CD, this will work only in Stop mode. |
Start | ■ Use this function to check that each speaker is correctly connected and that there is |
no problem. |
To end the test tone, press the TEST TONE button again.
L: Front Speaker (L) | C: Center Speaker | SW: Subwoofer |
R: Front Speaker (R) | SL: Rear Speaker (L) | SR: Rear Speaker (R) |
Adjusting Front/Rear Speaker Balance
• You can select between 00,
• The volume decreases as you move closer to
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to
• The sound gets louder as you move closer to +6dB and quieter as you get closer to
SETUP
44 | 45 |
