Samsung HT-X20 Connecting the FM Antenna, Connecting an External Analog Component, Connections

Connecting Audio from External Components

Connecting an External Analog Component

Analog signal components such as a VCR.

Audio Cable

(not supplied)

If the external analog component

has only one Audio Out, connect

either left or right.

1 Connect the AUX IN (Audio) on the Home Theater to the Audio Out of the external analog component.

■Be sure to match connector colors.

2 Press the AUX button on the remote control to select <AUX> input.

■You can also use the FUNCTION button on the main unit.

The mode switches as follows : DVD/CD ➝ AUX ➝ USB ➝ FM

• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

Connecting the FM Antenna ENG

FM Antenna (supplied)

CONNECTIONS

1 Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.

2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

• This unit does not receive AM broadcasts.

Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

■ Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise and may damage it.

■ Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.

18 19