MOWER SET-UP
CAUTION: DO NOT operate mower unless grass bag, side discharge cover or side discharge deflector is installed. Thrown objects may cause damage or injury. Never operate unit with rear door open unless grass bag is in place.
CAUTION: If clog or obstruction prevents grass flow, release engine/blade control and disconnect spark plug wire before attempting to clear any clogs.
To Bag Clippings
CAUTION: Check grass bag frequently for wear or deterioration. Replace worn or damaged bag with Ariens original equipment replacement bag only.
See Figure 9.
1.Shut off unit.
2.Make sure mulch cover is closed.
3.Lift rear door and remove mulch plug, if necessary.
4.Hook grass bag frame onto bag mount. There should be no openings between bagger and mounting surface after installing bag. If necessary, clear debris from bag mounting surfaces.
Grass Bag Removal
1.Shut off unit.
2.Use handle to lift and remove grass bag.
3.Install mulch plug (see Figure 9).
4.Close rear door.
NOTICE: Empty grass bag and clean mower pan after each use. DO NOT allow grass clumps or a grass coating to collect inside of grass bag or mower pan. Remove grass bag from mower, wash bag with hose and allow to dry.
2
1
3
4
1.Rear Door
2.Bagger
3.Bag Mount
4.Mulch Plug
Figure 9
To Discharge Clipping to the Side
See Figure 10.
1.Shut off unit.
2.Remove grass bag.
3.Lift rear door and install mulch plug (see Figure 9). Make sure lock snaps in place.
4.Make sure the mulch plug is locked by pulling on the handle near the bottom of the plug.
5.Open the mulch cover.
6.Align side discharge chute onto the mower tabs. Make sure chute covers discharge opening.
7.Rest mulch cover on chute to secure.
1 | 2 | 3 |
1.Side Discharge Chute
2.Mulch Cover
3.Tabs
Figure 10
EN - 15
