DRIVE BELT REPLACEMENT (911175, 179)
To Remove Drive Belt:
1.Disconnect spark plug wire.
2.Move cable adjuster to loosen wheel drive cable.
3.Disconnect the drive cable spring from the transmission bracket. See Figure 15.
21
1.Drive Cable Spring
2.Transmission Bracket
Figure 15
4.Remove blade and blade adapter from the crankshaft.
5.Remove drive pulley guide, belt channel guides and engine pulley with key.
6.Pull belt over end of crankshaft to allow belt to slide out through belt channel.
7.Rotate transmission backward to remove hardware, then adjust to loosen belt.
8.Remove belt and pull through the belt channel. See Figure 16.
1 | 2 | 3 | 4 |
11 | 5 | 9 | 8 | 7 | 6 | 10 |
1.Blade
2.Blade Adapter
3.Drive Pulley Guide
4.Belt Channel Guides
5.Engine Pulley with Key
6.Transmission
7.Transmission Bracket
8.Belt
9.Belt Channel
10.Transmission Pulley
11.Crankshaft
Figure 16
EN - 21
