Manuals / Ariens / Lawn and Garden / Snow Blower

Ariens 921032 quick start Step Six Install Skid Shoes, Spacer

Models: 921032

1 27

Download 27 pages 38.22 Kb

Page 10

Step Six:

Step Six:

Install Skid Shoes

1.Remove hardware from skid shoes.

2.Install hardware through blower housing and skid shoe as shown.

3.Adjust skid shoes, see Skid Shoes in Owners Manual.

Spacer

Image 10

Ariens 921032 quick start Step Six Install Skid Shoes, Spacer

Contents

Quick Start Guide Deluxe 30 921032 s/n 101 & upStep One Assemble Handlebars Unfold Lower HandlebarAttach Upper Handlebar Assembly Step One Assemble HandlebarsAttach Control Cables Step One Assemble HandlebarsUnfold Upper Handlebar Step One Assemble HandlebarsStep Two Connect Headlight Wire Harness Step Three Install Discharge Chute Step Four Install Discharge Chute Crank Step Five Install Remote Deflector Control Cable Step Six Install Skid Shoes SpacerStep Seven Check Function of Dual Handle InterlockStep Eight Check Tire Pressure Step Nine Check Auger Gearcase Oil Check oil level in auger gearcaseStep Ten Check Engine Crankcase Oil Ariens AX IMPORTANT The engineStep Twelve Fill Engine Fuel Tank Ariens AX Fill fuel tank. DO NOT OVERFILL! SeeFILLING FUEL TANK in Step Thirteen Starting the Engine Ariens AX Starting Engine / Step A Choke Turn throttle all the way up. Turn choke ONStarting Engine / Step B Rocker Switch Push rocker switch to RUN positionStarting Engine / Step C Fuel Shut Off Valve Turn fuel petcock to ON positionStarting Engine / Step D Key Starting Engine / Step E Prime Starting Engine / Step F Manual Start Starting Engine / Step F Electric Start Starting Engine / Step G Electric Start Press and hold starter buttonStarting Engine / Step H Warm up CHOKE OFF positionStep Fourteen Stopping the Engine Ariens AX 2. Push rocker switch to STOP position3. Pull safety key OUT Under normal conditions 1. Turn throttle downAdditional Resources Phone2013 The Ariens Company. All rights reserved Contact Ariens Company