12.Reinstall spring and block-off plate using hardware removed in Step 4.

13.Attach springs to idler and rotate idler into position.

14.Reinstall belt cover using hardware removed in Step 2.

15.Reinstall transmission cover using hardware from Step .

2.Use extra care when loading or unloading onto truck or trailer.

3.Secure unit chassis to transport vehicle. Never secure from rods or linkages that could be damaged.

4.Do not transport unit while engine is running.

TRANSPORTING UNIT

1.Always shut off engine and close fuel shut-off valve when transporting on a truck or trailer.

MAINTENANCE SCHEDULE

WARNING: AVOID INJURY. Read and understand the entire SAFETY section before proceeding.

IMPORTANT: Proper maintenance can prolong the life of unit. The following chart shows the recommended service schedule.

Interval

Task

Action

 

 

 

 

Check and clean

Remove and vigorously shake bag or use

 

collection bag.

compressed air to remove dust and debris.

 

 

Check bag for wear or deterioration. Replace

 

 

worn or damaged bag with Ariens original

 

 

replacement bag only.

 

 

IMPORTANT: If necessary, use a pressure

 

 

washer to clean bag. Allow bag to completely dry

Each Use

 

before use. It may be useful to have a spare bag

 

 

available.

 

 

 

 

Clean unit.

Remove debris with a soft-bristled brush. Do not

 

 

use harsh abrasives or cleaners.

 

 

 

 

Check engine oil.

See Engine Oil on page 14.

 

 

 

 

Follow engine

Perform scheduled engine maintenance. See

 

maintenance schedule.

Engine Manual for detailed instructions.

 

 

 

Every 10 Hours

Check fasteners.

Check all fasteners. Replace missing or

 

 

damaged fasteners. Tighten all nuts and bolts to

 

 

correct torque values.

 

 

 

As Needed

Lubricate throttle

Add a few drops of oil to throttle control cable

 

control cable.

and wire for smooth operation.

 

 

 

EN - 16