D ISHWASHER
How to load your dishes
Before washing, a few small steps can help you get a better wash and keep your dishwasher for longer. Remove the largest scraps of food left over on your plates, soak saucepans and frying pans with tough incrustations. After loading your dishes, make sure the blades on the sprayer arm turn well
First of all.
Before placing the dishes in the racks, remove the largest scraps of food left over on your plates, you will thus avoid blocking the filter, which would reduce the efficacy of the wash.
If the saucepans and frying pans are very dirty, allow them to soak before being washed. To make it easier to load your dishes, pull the racks out.
What goes into the lower rack?
We recommend you place the most difficult dishes to wash into the lower rack: saucepans, lids, soup dishes and plates, but also: mugs, cups and glasses (see photos for load examples).
•Serving dishes and large lids: place them on the sides of the rack.
•Saucepans, salad bowls: must always be placed upside down
•Very deep dishes: place them obliquely, thus allowing water to run down them and cleaning them better
•Glasses and cups: position them as indicated in the figure.
This basket is equipped with two removable grids: insert the cutlery one by one into the slots; knives and utensils with sharp blades or tips should be positioned with the sharppartsatthebottom.Position all cutlery items so that they don't touch.
If the rack has side baskets, the spoons should be loaded individually into the appropriate slots (see fig. A - B).
-Especiallylongutensilsshouldbe placedinthehorizontalpositionat the front of the upper rack.
What goes into the upper rack?
Place delicate and lightweight dishes in the upper rack: glasses, tea cups and coffee cups, saucers
-but plates too - shallow salad bowls,slightlydirtyfryingpansand shallowpans.
Position light weight dishes in such a way as to avoid their being moved by the spray of water.
The appliance can also be equipped with one or two
After loading the dishes, remember to check that the blades on the sprayer arms can turn freely without hitting against any dishes.
How to adjust the top rack.
The upper rack can be set in high or low position to enable you to organise your dishes effortlessly.
| 1 | 2 |
|
| |
Fig.F |
| 3 |
| 4 | |
|
|
Open the rail stop flaps and pull the rack out completely. Now place it in high or low position, then slide it along the guide rails until the front wheels also go in. Now close the rail stop flaps. Follow the sequence of actions illustrated in figure "F".
| Load examples |
lower rack | upper rack |
|
|
A
B
ARISTON DISHWASHER - Instructions for installation and use 3
