Description of the machine
AUS
PORTHOLE DOOR
PORTHOLE DOOR
HANDLE
KICK STRIP
ADJUSTABLE FEET
PORTHOLE DOOR
Always use the handle to open the porthole door (see figure).
DETERGENT DISPENSER DRAWER
| The detergent dispenser | |
| drawer is located inside the | |
| machine and can be | |
| accessed by opening the | |
| door. | |
| For more information on | |
| detergent measures, please | |
| refer to the chapter entitled | |
| “Detergents and laundry”. | |
| 1. | |
3 | use powder detergent. | |
Before pouring in the | ||
| ||
1 | detergent, make sure that | |
2 | extra compartment 3 has | |
been removed. | ||
| ||
| 2. main wash compartment: | |
| use powder or liquid | |
| detergent. If using the latter | |
| type of detergent, we | |
recommend it is poured into the drawer immediately | ||
before you start the |
3.extra compartment: Bleach
CONTROL
PANEL
The use of extra compartment 3 excludes the pre- wash function.
washing additives compartment: for fabric softener or liquid additives. We recommend that the maximum level indicated by the grille is not exceeded, and that concentrated fabric softeners are diluted.
TOUCH CONTROL PANEL
To adjust the settings, gently press the icon inside the sensitive (touch control) area as illustrated in the figure.
Standby mode
This
CHANGE LANGUAGE
The first time the machine is switched on, the first language will flash on the display. The " ", "OK" and "V" symbols will appear on the display, in line with the 3 buttons on the right- hand side. The languages change automatically every 3"; alternatively, they can be changed by pressing the buttons next to the " " and "V" symbols. Use the "OK" button to confirm the language, which will be set after 2". If no buttons are pressed, the automatic language change will begin again after 30".
The language may only be changed while the machine is switched off.
Press and hold the temperature +spin +delayed start buttons for 5''; a short beep sounds and the set language flashes on the display. Press the buttons next to the " " and "V" symbols to change the language. Use the button next to the "OK" symbol to confirm the language, which will be set after 2". If no buttons are pressed, the language set previously will be displayed after 30". Switch on the machine.
4