5
EN
1. Select HIGH HEAT by pressing the
HEAT button.
2. Position the PROGRAMS knob on
.
3. Press the START button.
1. Select HIGH HEAT by pressing the
HEAT button.
2. Position the PROGRAMS knob
on .
3. Press the START button.
ProgramsProgram What it does... How to set it... Note:
Sensor
Drying
(heavy loads)
Dries completely: your
clothes are ready to be worn.
For heavy loads (from 7 to
13 lb / 3 to 6 kg) of Regular
Cottons.
!If you select LOW HEAT, this
program will not dry your
clothes. For Acrylic fibers or
small loads select Timed
Drying.
This programme can also be
used for light loads if you prefer
a damper result.
1. Select HIGH HEAT by pressing the
HEAT button.
2. Position the PROGRAMS knob
on .
3. Press the START button.
Sensor
Drying
(light loads)
Dries completely: your clothes
are ready to be worn.
For light loads (from 2 to 7 lb /
1 to 3 kg) of Regular Cottons,
Permanent Press.
!If you select LOW HEAT, this
programme will not dry your
clothes. For Acrylic fibers or
small loads select Timed
Drying.
This program can also be used
for heavy loads if you require a
slightly drier result.
Timed Drying
up to 120 minutes
Dries wet clothing that will be
ironed, acrylic fibers, or small
loads (less than 2 lb / 1 kg).
Consult suggested drying
times (see Laundry).
Always allow the dryer to
complete this phase.
This is the final phase of all programs.
Approximately 10 minutes before the
finish, the knob advances
automatically to the Air Fluff phase.
After this the clothing is ready to be
taken out.
Heating elements turn
themselves off and clothing is
cooled down.
1. Select required heat setting HIGH
HEAT or LOWHEAT by pressing
the HEAT button.
2. Position the PROGRAMS knob on
the desired time.
3. Press the START button.
Fabric Care
Easy Iron
Fabric Care
Air Fluff Phase
Brief program (approximately
10 minutes) that softens fibers
of clothing that is ready for
ironing.
!This is not a drying
program (see below).
Easy Iron Program