Exhaust ducting
The ducting system for the dryer must be as short and straight as possible and with as few elbows as possible.
Maximum length of duct:
Number | Rigid Duct | Flexible Duct |
of Elbows: |
|
|
0 | 22 ft. (6.6m) | 15 ft. (4.5m) |
1 | 18 ft. (5.4m) | 12 ft. (3.6m) |
2 | 14 ft. (4.2m) | 9 ft. (2.7m) |
3 | 6 ft. (1.8m) | 4 ft. (1.2m) |
|
|
|
The above assumes that an approved venting hood is used and that the flap on this hood must not have magnetic catches.
WARNING:
-The appliance MUST NOT be exhausted into a chimney, a wall, a ceiling, or a concealed space of a building.
-To reduce the risk of fire, this appliance MUST BE EXHAUSTED OUTDOORS.
-Do not discharge the exhaust air into a flue, which is used for exhausting fumes from other appliances burning gas or other fuel.
Depending on the frequency of use it is essential that the ducting is checked periodically and any fluff or debris removed.
www.aristonappliances.us
Stacking kit
EN
The dryer is provided with a stacking kit, which allows the dryer to be fitted to the top of an Ariston washing machine:
Model AW125NA
Model AW129NA
Model AW149NA
The kit contains all the necessary brackets and screws. Tools needed:
No.2 Philips Screwdriver 2mm drill, power or hand drill
SAFETY
For personal safety, DO NOT try to fit the dryer on top of the washing machine on your own. A second person should help to lift the tumble dryer onto the washing machine and to relocate the stacked washer and dryer.
1.You will need to get to the sides of the washing machine to fit the stacking kit and dryer. If necessary pull the machine away from its location to gain access to the machine to fit the stacking kit and dryer.
2.Follow the instructions provided with the stacking kit.
11
