4. Pastry Mode
Position of the “C” temperature knob: between 50°C and 250°C.
The fan will start and both the top and the bottom heating elements will come on. This provides a delicate cooking process with a prevalence of heat from the bottom.
This mode is ideal for baking and cooking delicate foods - especially cakes that need to rise.
5. Grill
Position of the “C” knob: between 40% and 100%.
The central heating element of the grill will come on. This incandescent heating element cooks food by means of thermal radiation directed downwards.The extremely high and direct temperature of the grill makes it possible to brown the surface of meats and roasts while locking in the juices to keep them tender.
6. Double Grill 
Position of the “C” knob: between 40% and 100%.
Both heating elements of the grill will come on. This grill is larger than other grills and has a completely new design, which increases the cooking efficiency, thus browning the entire food surface uniformly.
7. Ventilated Double Grill
Position of the “C” temeprature knob: between 100°C and 250°C.
Both heating elements of the grill will come on, as well as the fan. This mode increases the effectiveness of the unidirectional thermal radiation of the heating elements through forced circulation of the air throughout the oven.
This helps prevent food from burning on the surface, allowing the heat to penetrate right into the food.
Oven Light
When the appliance has been switched off, turn the oven light on by pressing button "1". To turn it off, press the same button again. The light illuminates the oven and remains on for the duration of the entire cooking time. If there is nothing in the oven, it will switch itself off automatically 10 minutes after the last directions were entered onto the control panel.
Forced Air Ventilation
In order to reduce the external temperature of the oven, this appliance has been equipped with a cooling fan which stays on during the cooking process. A normal flow of air can be heard exiting between the oven door and the control panel.
When cooking is over, the fan remains on for a few minutes, in order to enable the oven to cool down quickly. If there is a cooktop above the oven, the cooling fan may switch itself on automatically to protect the electronic components, even if the appliance has been switched off.
Note: In the event of a power failure, the oven will memorize the reached cooking stage in such a way that it can recommence from the very point at which it had stopped cooking, as soon as the power supply has been
Warning
Do not place cookware on the bottom of the oven because this will result in uneven cooking and the curved surface of the bottom would not provide a stable support surface.
Programming the cooking mode
5
B | 1 2 3 | C |
The display panel has a dual purpose: giving the correct time, and programming the cooking mode.
Cooking programmer
To programme the cooking mode,follow the instructions below:
•select the cooking mode by turning knob "B", and the temperature by turning knob "C".
•select cooking time by pressing button "2". The length of cooking time will appear on the display panel, and it can be altered by turning knob "C" until the desired cooking time comes up.The selected cooking time does not include the time required for preheating the oven.
•select end cooking time by pressing button "3". The
display panel will feature the end cooking time obtained by adding the current time to the previously selected cooking time, as well as the time necessary for the oven to preheat (automatically calculated by the appliance according to the cooking mode selected). Turn knob "C" until the display panel features the time you want the food to be ready.
•press button "1" to set the programme.
After these selection procedures, the display panel will feature the time at which preheating will commence, and that at which cooking will be over. The latter can be altered up until the cooking mode and temperature reappear on the display panel. Any incorrect data can be corrected simply by repeating the instructions stated above.
To alter any entries after the cooking mode has been programmed, press button "1" for a few seconds.The data which was previously entered will appear on the display panel.This data can be altered by following the instructions above.
To cancel a cooking mode which has already been programmed
To cancel any programme which has been entered, turn knob "B" anticlockwise until the term "OFF" appears on the display panel.
15
