How to Start the Appliance
NOTICE
After the appliance has been delivered, stand it in the upright position and wait approximately 3 hours be- fore connecting it to the electrical outlet to guarantee that it operates properly.
Before placing foodstuffs in the refrigerator or freezer, clean the interior well with warm water and baking soda.
Motor protection time.
This model is provided with a motor protection system. Therefore, if the compressor does not start immediately after the user has turned it off, do not worry as it will
start automatically after approximately 8 minutes. Once you have plugged the appliance into the mains socket, make sure the display is on.
Freezer compartment
When you turn the appliance on (by turning the appliance ON/ OFF knob "B" to the required freezer compartment operating temperature), we recommend you enable the SUPER FREEZE function to speed up the cooling process inside the compartment; when the latter has reached the optimal temperature, the function will be disabled and you may place the frozen foods inside the freezer.
Refrigerator compartment
When you turn the refrigerator compartment on (by turning knob "A" to the required refrigerator compartment operating temperature), we recommend you enable the SUPER COOL function to speed up the cooling process inside the compartment: after a few hours, you may place food inside the refrigerator.
How to use the display
Temperature settings
If the compartment concerned is switched off, the word OFF will appear on the relative indication space on the display (E for the refrigerator and F for the freezer). If the compartment is switched on, then the temperatures set at that time will appear. To change them, turn the relative knob directly (A for the refrigerator and B for the freezer).
The refrigerator compartment can be set to between +2°C and +8°C, while the freezer compartment can be set to a tem- perature of between
When the HOLIDAY function is enabled, temperature regulations cannot be made, but the appliance automatically sets itself to the best setting for the situation: +12°C for the refrigerator compartment (if enabled) and
How to use the functions:
Function symbol during normal operation.
Function selected (outline flashing).
Function enabled (outline on)
Enabling/disabling the functions
Press the MODE button "C" as many times as necessary for the red outline of the function you wish to act on to light up: this indicates that the function has been selected and is ready to be enabled or disabled. Now you can enable or
disable the selected function using the SELECT button "D". NOTE: if you do not confirm your selection by pressing the SELECT button within five seconds of the last action performed on the display, the latter shall go back to displaying the function previously set and indicate that no new modification has been made.
The SUPER COOL function is linked to the refrigerator compartment and when the latter is switched off, no action whatsoever will be possible on the former, other functions foresee an operation that can create conflicts (for example, when the HOLIDAY and SUPER FREEZE functions are enabled simultaneously), in this case a
Enabling/disabling the DEMO mode:
To run a demonstration of the display operation while keeping the appliance turned off, just enable the DEMO mode.
Enabling:
-set the freezer temperature knob to 0;
-keep the two buttons “Select” and “Mode” pressed for approximately 5 seconds, until you hear the buzzer and the two words “OFF” and “OFF” flash on the display; these words will flash for the entire duration the DEMO mode is enabled.
Disabling:
-set the freezer temperature knob to 0;
-keep the two buttons “Select” and “Mode” pressed for approximately 5 seconds, until you hear the buzzer and the two words “OFF” and “OFF” on the display stop flashing.
GB | 16 |
