Starting the dishwasher
Ready, steady, go!
You have loaded your dishes and you now have to set the wash cycle. It takes just one minute to learn how
After performing all the operations described in the previous paragraphs press
Selecting the wash cycle.
To select the wash cycle press button "P". Each time you press the button, a beep will sound and indicator lights "E" will light up in sequence: choose the cycle you deem most suited to the type of dishes to be washed (have a look at the wash cycle table on page 7). If the appliance door is shut, press the Start button "R" and you will hear a beep; the cycle will start up within a few seconds.
The dishwasher keeps you informed.
Your dishwasher is fitted with indicator lights (G) which light up to indicate the cycle phase under way. prewash,wash,rinsing, drying. At all times, your dishwasher tells you which cycle phase is under way.
Modifying a wash cycle in progress.
If you have chosen the wrong cycle, not to worry! You can modify the wash cycle in progress, if it has only just started.
Keep the RESET button "R" pressed for about 5 seconds: a prolonged beep will sound, followed by three short beeps. Indicator light "G" will turn off and at this stage, all the settings will have been cancelled. You are now free to
You can cancel the
wash cycle in progress, if it has only just started.
You've left out a dish?
Well, it happens to everyone.Interrupt the wash cycle by pressing the
Finished?
The end of the wash cycle is indicated by two short beeps and the flashing of the drying phase indicator light.
The end of the wash cycle is indicated by two short beeps and the flashing of the drying phase indicator light.
•Turn the appliance off by pressing button "A", thus cutting off the electricity supply.
•If accessible turn off the water tap.
•Wait a few minutes before unloading the dishes: they are very hot! If you wait a little while, they dry better thanks to the steam. Empty the lower rack first.
If opening the door soon
after the end
of the program, or
during it, stand away from the dishwasher, to avoid possible injury from hot steam.
There's been a power failure? Have you opened the dishwasher door?
The wash cycle stops and then restarts when the electricity comes back on or when you shut the door. Everything is under control!
Would you like to see which settings you have made?
At any time, when the cycle is under way, if you press button "P", the cycle in progress indicator light will light up for a few seconds.
Make sure the wash
cycle has ended before
removing the dishes!
www.aristonappliances.us | ARISTON DISHWASHER - User Manual 5 |
