Arkon MP070-7PS-1 manual Windshield Installation, Dash Installation Optional, Pedestal Adjustment

MP070-7PS-2 & MP070-7PS-1

7" Modular Windshield Suction Pedestal

MP070-7PS-2

MP070-7PS-1with a single T-tab is also available with the same set of instructions listed below.

(B)	Pedestal
	Shaft

(A)

Windshield Installation

Step 1. Push the pedestal suction cup (A) firmly to the windshield. Flip the lever (B) down to secure the suction cup.

	Dash Installation (Optional,
	when disc is included)
	Step 1. Locate a safe flat surface on
	the dash or console to mount
(A)	the pedestal. Clean the dash
	with the alcohol pad
(B)	provided. Dry the surface
	before applying the adhesive
	disc (C).
(C)	Step 2. Push the pedestal suction cup
	(A) firmly to the disc (C). Flip
	the lever (B) down to secure
	the suction cup.

(E)

(D)

(F)

Pedestal Adjustment

Step 1. Adjust the vertical angle of the pedestal shaft by 180° and the swivel rotation by 360° by loosening the adjustment

.knob (D). Adjust the lateral angle of the dual T-head (F) by 180° and the rotation by 360° by loosening the adjustment knob (E).

(G)

(F)

Device Cradle Installation

Step 1. Attach the device cradle to the pedestal by inserting the dual T- tabs (F) of the pedestal into the T-slots of the cradle (G). (cradles are sold separately and vary depending on the device you are using)

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and/or air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of the pedestal mount.

		TM
	The Mobile Mounting Specialists
Consumer Hotline:		www.arkon.com
(USA)	(800) 841-0884	Arcadia, CA 91006 USA
(INT'L)	(626) 254-9005	Made in Taiwan
	Mon-Fri. 9am-5pm, PST	© Copyright 2007 Arkon Resources, Inc.