Aroma ARC-1130S Short Cord Instructions, Groundinginstructions, How To Clean, Company

Diagram 1

SHORT CORD INSTRUCTIONS

1.A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

2.Longer extension cords are available and may be used if care is exercised in their use.

3.If a longer extension cord is used:

a.The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.

b.The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled by children or tripped over unintentionally.

c.If the appliance is of the grounded type, the extension cord should be a grounding wire/cord.

GROUNDING￿INSTRUCTIONS

HOW TO CLEAN

Always unplug unit and allow to cool

completely before cleaning.

To Clean Exterior Body and Inner Pot:

1. Remove the inner pot. Wash it in warm, soapy water using a nylon sponge or dishcloth.

2. Rinse and dry thoroughly.

3. Empty out the condensation collector into a sink after each use. Remove the condensation collector by pulling it out from its indented portion. Reattach the condensation collector before next use.

4. Wipe the body of the rice cooker clean with a damp cloth.

To Clean the Underside of the Lid: (See Diagram 1) The underside of the lid should be cleaned after every use.

1. Detach the inner lid from the shaft by gently tugging it outward. Soak briefly.

2. Wipe the underside of the lid with a warm, damp

CIRCUIT(A) GROUNDING CONDUCTOR CONNECTED PROPERLY

GROUND

PRONG

(C)

ADAPTER

(B)

METAL

MOUNTING

SCREW

COVER OF GROUNDED

OUTLET BOX

cloth.

3. Dry with a soft, dry cloth.

4. Install the inner lid to the outer lid by pressing the

inner lid over the inner lid shaft. After installing the inner lid, the small side of the inner lid seal should face you with the outer lid open. If the inner lid is inserted improperly, the outer lid will not close.

CAUTION:

Never clean the appliance while the cooker is still hot.

To Clean Heating Plate: (See Diagram 2)		Diagram 2
The heating plate should be cleaned after every use.
1.	Wipe the heating plate with a warm, damp cloth.
2.	Dry with a soft, dry cloth.
3.	Rice grains or other dried materials may stick to the

GROUNDING MEANS

AA22D

This appliance must be grounded while in use to protect the operator from electrical shock. The appliance is equipped with a 3-conductor cord and a 3- prong grounding-type plug to fit the proper grounding-type receptacle. The appliance has a plug that looks like sketch A. An adapter, sketch B, should be used for connecting sketch-A plugs to two-plug or two-prong receptacles. The grounding tab, which extends from the adapter, must be connected to a permanent ground such as a properly grounded outlet box as shown in sketch C using a metal screw.

THIS APPLIANCE IS FOR COMMERCIAL USE ONLY.

2

heating plate. Repeat Steps 1 and 2 until the
heating plate is completely clean to ensure full
contact between the inner pot and the heating
plate. Otherwise, the appliance will not close
properly and may overheat.
NOTE:
• Do not use harsh abrasive cleaners or products that are not considered
safe to use on nonstick coatings.
• Always make sure the outside of the inner pot is dry prior to use. If the
inner pot is returned when wet, it may damage this product, causing it to
malfunction.
• Any other servicing should be performed by Aroma Housewares
Company.	7