3. The Counters Window

The Counters/Info

The Timecode

The Small Camera

Window

Window

Report Window

Clicking on any of the Window buttons will open the respective window. These windows contain additional status information and advanced control capabilities.

Counters

Depending on the camera used, the Counters window displays the following counters that are also available on the camera LCD display: Take, Total, Magazine, Battery, Gate Filter.

In addition it displays the following status information: Frames, Program, Arriglow.

Buttons

 

Mode

Clicking this button will change the mode of the LCD display on the camera.

Reset Total

Clicking this button will reset the TOTAL counter on the camera to “0000”.

Run at 1 fps

Clicking this button will make the camera run at 1.000 fps crystal speed.

+/-0.001 fps

Each time one of these buttons is clicked, the current camera speed will change

 

by 1/1000 fps. These buttons can be used to fine tune the fps rate while shooting

 

a monitor.

Arriflex LCC Basics, 2/97, Page 4