2.2.

Output Format

Calibration

Operation

•The determination of the ‘output format’ photo is a two-stage selection procedure:

First the desired projection aspect ratio must be choosen (i.e.: 1:2,35 CS means squeezed for projection with cinemascope lenses).

All available geometries for this aspect ratio will appear in the second drop down list. The pixel resolution and the pitch size provides additional information about the chosen output geometry.

A crop box with the appropriate aspect ratio will appear on the display. Geometries which are not available in the list can be generated in the ALGUI geometry setup as described in chapter 5.2.2.2 of the ARRILASER manual. Restarting the ALICE software will place those new geometries in the list.

Note: Changing the ‘output format’ will reset the crop area to the maximum appropriate settings to fit into the new ‘output format’.

•Select the actual ‘calibration‘ photo

and ‘loader LUT‘ photo for the used film stock and lab and the format conversion look-up-table (LUT).

The LUT converts the given files into the Cineon format. Choose 10log, if the files are already in the Cineon format. Those settings are taken from the ALGUI input window; changes will be returned to the ALGUI input window.

•‘Intermed Positive’ photo:

Adds the necessary changes to the image processing config file for intermed positive recording.

Necessary adjustments like flip the image, paste on black background and invert the loader LUT (interposlut) are automatically done. Results can be seen in the film view. No other adjustments need to be done for intermediate positive recording.

12