Color Management 5.2.4
For each entry in the soft clip configuration file, the following parameters are valid:
soft clip | name of the setting, used as value of soft clip parameter of the CMS node. Example: “mysoftclip”. |
|
|
DL | luminance difference, used for each color if not specified color specific |
dC | chroma difference, used for each color if not specified color specific |
dL.R | luminance difference for red |
dL.G | luminance difference for green |
dL.B | luminance difference for blue |
dL.C | luminance difference for cyan |
dL.M | luminance difference for magenta |
dL.Y | luminance difference for yellow |
dC.R | chroma difference for red |
dC.G | chroma difference for green |
dC.B | chroma difference for blue |
dC.C | chroma difference for cyan |
dC.M | chroma difference for magenta |
dC.Y | chroma difference for yellow |
|
|
The color specific settings (dL.R , etc.) always take precedence over the color independent setting (dL), regardless of the order of the arguments. This means, there is no difference in specifying e.g. dL.R before or after dL .
36