Due to local telecommunications regulations, only certain channels are allowed in some countries. The WZE-3 must be used in odd numbered channels in France.
In all other countries, radio channels from 0-7 may be programmed if there are no local telecommunication restrictions for the 2.4 GHz ISM-band.
•Set the desired channel with the rotary selection knob D photo on the WZE-3.
•Using the selection knob on the LDB (Lens Data Box), the FEM-2, the UMC-3 or ARRIFLEX 416 plus(HS), select the same channel as on the WZE-3.
Selector switch number 9 switches the radio modem off, number 8 is reserved for special purposes.
Quality of the radio connection
The RF-LED D photo (page 10) shows whether the quality of the radio transmission is sufficient. As long as the RF-LED is green, the radio connection is perfect. If the LED is illuminated briefly red, this means that a data packet has been lost. The packet is cyclically transmitted and the lens adjustment is still correct.
If the LED lights up red several times briefly, or continuous- ly, it must be assumed that lens adjustment is no longer being performed correctly. If the LED flashes red, the radio connection has been interrupted for longer than a second.
The radio connection is best when there is visual contact between the antennas of the LDB, UMC-3, URM-2/-3 or ARRIFLEX 416 Plus(HS) and the WZE-3 is as small as possible. The maximum range inside buildings depends on the particular building and is typically approx. 30m. Outdoors the range is approx. 100m.
