Arrow Fastener VD108-A 697.68618 Step 18

Step 18

Y31

● Parts Needed For ●

Door Installation & Adjustment

●●

● Right Door Assembly (1)

●●

● Left Door Assembly (1)

1 From inside the building, put the

bottom of the right door assembly (on

your left when you are inside the

building) behind door jamb into the

front frame track.

2 Position the top of the door so that

the holes in the door line up with the

holes in the door slides.

3 Fasten the door to the door slides

using a #10Bx1/2" screw.

NOTE

The four holes in the top of each

door allow you to adjust the

doors. Place the door slide in

the middle 2 holes.

4 Repeat steps 1 through 3 for the

left door.

Keep this Owner's Manual and Assembly Instructions for future reference.

STEP

Horizontal Door Brace

STEP

Gable

#10Bx1/2" Screw

Door Slide

Adjustment Holes

Adjustment Holes Allow

Doors to Meet Evenly

Along Their Length

Right Door Left Door 4

Front Floor Frame Assembly

Door Track

Door Slide

Door

STEP

Contents

Main Model No. VD108-A 697.68618 Owner's Manual & Assembly Instructions Owner's Manual BEFORE YOU BEGIN.... Selecting and Preparing Y our Site: Watch the W eather: Teamwork: Tools and Materials: PLAN AHEAD.... SAFETY FIRST.... CARE & MAINTENANCE.... ACCESSORIES.... SHELF UNITS ATTIC KIT / WORKBENCH KIT ANCHOR KIT Model No. AK100 Page Page The Foundation For Your Building Foundation OPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB109-A or 68385-A) OPTION 2: Wood Platform OPTION 3: Concrete Slab Anchoring Down The Building Anchoring Arrow Anchoring Kit: (Model No. AK100 or 68383) Anchoring into Concrete: Arrow Anchoring Kit: (Model No. AK4 or 60298) Anchoring into Wood/Post: Hardware Parts List Assembly Part Part Quantity Check Key No. Number Description in Carton List Assembly by Key No. 1 2 3 Step 1 Floor Frame Assemblies Step 2 Frame Assemblies 1 one bolt in the center hole. 2 Step 3 Roof Beam Assemblies Step 4 Door Track Assembly must 2 1 Step 5 The floor frame must be square and level or holes will not align. 1 Step 6 Posts/Top Frames 4 must be square and level 1 Step 7 1 Studs/Front Channel 2 3 Step 8 1 Side Siding 2 3 Step 9 1 Rear/Front Siding 2 3 Step 10 1 Gable Assemblies FRONT Step 11 1 Gables/Braces 2 only Step 12 1 Roof Beams 2 small holes on top, Step 13 Step 14 Right Roof Panel FRONT 1 Note the sequence and position they are to be installed. Step 15 Roof Assembly 2 FRONT 1 Step 16 3 4 5 6 Step 17 1 2 3 with 1 bolt in the center. Step 18 Door Installation & Adjustment 1 2 3 VD108-A 697.68618