Aruba Networks FIPS 140-2 manual Indicator LEDs Label Function Action Status, Pwr, Enet

2.1.1.1Dimensions/Weight

The AP has the following physical dimensions:

∙4.9” x 5.13” x 2.0” (124mm x 130mm x 51mm)

∙15oz (0.42 Kgs)

2.1.1.2Interfaces

The module provides the following network interfaces:

∙2 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX

∙Antenna (model Aruba AP-124 only)

o3 x RP-SMA antenna interfaces (supports up to 3x3 MIMO with spatial diversity)

∙1 x RJ-45 console interface

The module provides the following power interfaces:

∙48V DC 802.3af or 802.3at or PoE + interoperable Power-over-Ethernet (PoE) with intelli-source PSE sourcing intelligence

∙5V DC for external AC supplied power (adapter sold separately)

2.1.1.3Indicator LEDs

There are 5 bicolor (power, ENET 0, 1, and WLAN) LEDs which operate as follows:

Table 1- Indicator LEDs

Label		Function		Action	Status
PWR		AP power / ready status		Off	No power to AP
				Red	Power applied, bootloader starting
				Flashing - Green	Device booting, not ready
				On - Green	Device ready
ENET 0		Ethernet Network	Link	Off	Ethernet link unavailable
		Status / Activity
				On - Amber	10/100Mbs Ethernet link negotiated
				On - Green	1000Mbs Ethernet link negotiated
				Flashing	Ethernet link activity
ENET 1		Ethernet Network	Link	Off	Ethernet link unavailable
(Dual	radio	Status / Activity
				On - Amber	10/100Mbs Ethernet link negotiated
only)
				On - Green	1000Mbs Ethernet link negotiated
				Flashing	Ethernet link activity
WLAN 2.4Ghz		2.4GHz Radio Status		Off	2.4GHz radio disabled
				On - Amber	2.4GHz radio enabled in WLAN mode
				On – Green	2.4GHz radio enabled in 802.11n mode

8