This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
1 Read InstructionsAll the safety and operating instructions should be read before the unit is operated.
2 Retain InstructionsThe safety and operating instructions should be retained for future reference.
3 Heed WarningsAll warnings on the unit and in the operating instructions should be adhered to.
4 FOLLOW INSTRUCTIONSAll operating and use instructions should be followed.
5 CleaningUnplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6 AttachmentsDo not use attachments unless recommended by the unit’s manufacturer as they may cause hazards.
7Water and MoistureDo not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel.
8AccessoriesDo not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well
2
8A
9VentilationSlots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be placed in a
This unit should be operated only from the type of power source indicated on the marking label.
11If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and