READ CAREFULLY BEFORE USING

Cautions in use of DVD-Video player are described below.

Please read carefully before using a DVD-Video player.

INSTALLATION PLACE AND HANDLING

•When you place this player near other devices, they may affect poorly together.

•When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected).

•Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact with the player for a long time. They will cause deterioration or paint peel- off.

NOT IN USE

•When the unit is not in use, be sure to remove the disc or tape and turn off the power.

•If you do not use the unit for a long period, remove batteries in remote control to prevent leakage.

•In case you don’t use the unit for a long time, the unit may not function properly in the future. Turn on and use the player occasionally.

MOVING

•Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be damaged.

•Eject any videotape.

CHECKING

•This is a high precision device. To obtain a clear screen, we recommend regular inspection and maintenance every 1,000 hours of use by technical engineers.

•For checking, contact your dealer or your nearest service center.

TAPE AND DISC HANDLING

•Do not use any tape or disc with damage as described below. Damage of video head or cut/coiling of tape may cause failure.

-Tape with mold

-Tape or disc stained with juice or attachments

-Tape having breakage connection

-Disassembled tape

-Disc with severe scratch

-Tape or disc with loose or poorly fitting labels

•Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape after the moisture condensation is disappeared.

•After use, store tape vertically in a case to prevent loose.

•Do not store the unit where the following conditions may exist:

-High temperature and humidity

-Subject generation of mold

-Subject to direct sunlight

-Much dirt or dust

-Near strong magnetic materials such as speaker

CLEANING

•Dust off dirt in cabinet or control panel part smoothly with a soft cloth.

•For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it out.

•Follow instructions in using chemical cleaners.

•Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off.

4

INSTRUCTIONS FOR USING THE REMOTE CONTROL

•Operate remote control within 7m from the unit.

•Do not press 2(two) buttons at the same time.

•Protect from dirt and excess humidity.