Asante Technologies 10BaseFL, 10BaseT manual Thin cable 10Base2 with Mini, Mau

Thin cable (10Base2) with Mini

MAU

Connect the 10Base2 Mini

MAU to the device’s AUI port.

Before the 10Base2 Mini MAU is connected to the thin Ether- net cable, there may be a straight-through (barrel) BNC connector in the cable at the location where a node connec- tion is available.

Simply remove the barrel con- nector, and connect a “T” con- nector to the BNC port on the Mini MAU. The connector slips on, twists, and locks in place.

❖Note: Check with your network adminis- trator before disconnecting cable. Other users must be warned of the interruption of network operations. Even if the network uses self-terminating media or connectors,

users downstream from the break will be affected.❖

Mini MAU Page 9