Chapter 5 Firmware Update Procedure

The application firmware is field-updateable. The update procedure and the required equipment are described in this chapter.

Note: Once the system is up, it is controlled by an executing application image residing in the flash memory. No firmware update is possible during this mode. The update can only be done when the system is resetting. To initiate this sequence, the user must set the boot mode configuration parameter to Boot from Net during normal operation, and then perform a reset. When the Boot from NET option is set, Bootstrap can start the system with an image residing on a TFTP server on the network. Be sure that the TFTP server residing on the network is accessible by the switch.

Note: It is highly recommended, though not necessary, to use a RS232 serial port connection to the switch during the firmware updating procedure. When using a telnet Session or web interface alone, your connection to the switch will not be available until the switch has entered forwarding mode. This takes approximately three minutes. Once completed, the software version should be verified in the Firmware Update page. If the older version of the software has not been replaced, the unit was unable to reach the new software and booted from the old “flash” version.

The upgrade procedure is as follows:

1.Go to System Manager/Firmware Update (in the Web or Console Interface).

2.Set Boot from Net option during the normal operation.

3.Verify information such as the IP address for the TFTP Server, Gateway IP address, and the file name and its path of the new image, and then press the Submit button, in the Web, or Ctrl+W, in the console interface.

4.Restart the system with Boot from Net set.

5.Bootstrap will retrieve the new image then pass control to it.

6.The system executes the new image.

Note: The previous image in the flash will not be replaced by the new image using this option. The image in the flash will be over-written if Boot from Net and Save option is selected.

7.If you decide to upgrade to the new image, go to Firmware Update again. Set Boot from Net and Save option, and press the Submit button, in the Web, or Ctrl+W, in the console interface.

8.Restart the system with Boot from Net and Save set.

9.The new image should over-write the old image in the Flash memory. Verify it by going to the Firmware Update screen and checking the Software Release information.

36

Page 36
Image 36
Asante Technologies 65120 user manual Firmware Update Procedure

65120 specifications

Asante Technologies 65120 is a high-performance network switch specifically designed to meet the needs of modern business environments. It stands out for its advanced features that ensure efficient data management and robust network performance. One of the key characteristics of the 65120 is its ability to support Gigabit Ethernet, which allows for rapid data transfer rates, crucial for businesses that rely on high-speed internet for their operations.

Equipped with 24 ports, the 65120 provides ample connectivity options, allowing businesses to connect multiple devices, including computers, printers, and servers. This extensive port availability ensures that companies can expand their network effortlessly as they grow, without having to invest in additional switches. The switch also features a compact design, making it easy to install in various environments, whether in a server room or an office space.

The 65120 employs advanced technologies that enhance its operational efficiency. One notable feature is its support for VLAN (Virtual Local Area Network) capabilities. VLANs allow network administrators to segment the network into smaller, manageable pieces, improving performance and security by isolating sensitive data traffic from regular network communication. This is particularly beneficial for organizations that handle sensitive customer information or require separate environments for different departments.

Additionally, the switch supports quality of service (QoS) features, which prioritize network traffic to ensure that critical applications receive the bandwidth necessary for smooth operation. This capability is essential for businesses that utilize voice-over IP (VoIP) or video conferencing technologies, where latency can significantly affect communication quality.

Power over Ethernet (PoE) is another significant advantage of the Asante Technologies 65120. This feature allows devices such as IP cameras, wireless access points, and VoIP phones to receive power through the network cable, eliminating the need for additional power sources and simplifying installation processes.

Overall, the Asante Technologies 65120 is a versatile and robust network switch designed for the evolving demands of modern businesses. Its combination of extensive port availability, advanced networking technologies such as VLAN support and QoS, and the convenience of PoE makes it an ideal choice for organizations seeking to enhance their network infrastructure while ensuring scalability and improved performance. This switch not only simplifies network management but also empowers businesses to stay competitive in an increasingly digital landscape.