Asante Technologies FriendlyNet user manual 10Base-T Station to Hub Connection

Installation

10Base-T Station to Hub Connection

To connect a 10Base-T network station to the FriendlyNet Hub, follow the instructions and diagram below.

▲Important: Use a straight-through network cable. Make sure the length of the cable between the station and hub does NOT exceed 100 meters (including all patch cables and cross-connect wires).

Network cable segments can be connected to, or disconnected from, the hub while the power is on.

1Connect one end of the network cable to an RJ- 45 port on the FriendlyNet Hub. ❶

2Connect the other end of the cable to the net- work station’s Ethernet adapter. ❷

			❶
UPLINK	5	4	3	2	1

straight-through cable

❷

Figure 2-1 Connecting a 10Base-T station to the FriendlyNet

Ethernet Hub

Page 2-2