Ashly FTX-2001 specifications Architects Specifications, Features

FTX-2001 MOS-FET Power Amplifier TECHNICAL NOTES & SPECIFICATIONS

ARCHITECTS SPECIFICATIONS

FTX-2001	L.E.D type indicator shall be employed to show the power level of
The power amplifier, being of two channels, shall deliver a mini-	each channel and self contained forced air cooling shall be used.
mum power of 300 watts RMS per channel into 8 ohm loads and	Each channel shall have a PROTECT LED which indicates an open
475 watts RMS per channel into 4 ohm loads, or 550 watts per	relay due to short-circuit, ultrasonic, DC, or turn-on delay. The
channel into 2 ohm loads with both channels operating. When	power output devices shall be of the Lateral MOS-FET type.
switched into bridged-mono mode, the amplifier it shall deliver at	The amplifier shall weigh 53lbs net and mount in a standard 19
least 600 watts into a 16 ohm load, and 950 watts RMS into an 8
ohm load. The amplifier shall be immune to damage from shorted,	inch rack using three spaces (5.25” high). The power requirement
open, or mismatched loads. The amplifier shall have a gain of 29	shall be 110-125VAC, 50-60-Hz. The power amplifier shall be an
dB +/- .2dB per channel and an input sensitivity of 1.7 Volts +/-	Ashly FTX-2001.
2% for full rated output. Frequency response shall be 20Hz to
20kHz +/- .2dB. It shall be stable into any load, including pure
capacitors and inductors. Hum and noise shall be at least 105dB
below full output and SMPTE intermodulation distortion shall be
less than .01%. The amplifier shall have rear panel switching for
parallel mono and bridging modes and rear mounted level con-
trols. The inputs shall be of balanced bridging type with barrier
strip, 1/4” phone jacks, and female XLR connectors. A three-color

Features:

•Turn-on Delay

•Fuseless Short Circuit Protection

•U.L. Listed

•5-Year Worry-Free Warranty

•MOS-FET Output Devices

•Class-A Full Complementary Front End

•Modular Construction

•XLR, 1/4", and Barrier Strip inputs

•Stereo, Parallel Mono & Bridging Modes

•LED Level meters

•Forced Air Cooling

•Perfect Overload and Square Wave Response

•Stable Into Any Load

•Self Protecting Under Virtually All Conditions

•Input Transformers Optionally Available

•PowerCard Input Option Ready