Ashly specifications Rear Panel FTX-2001 Applications, General Specifications FTX-2001, Imd Ihf

General Specifications FTX-2001		IM Distortion (SMPTE):	<.017%, 8 ohm
Power Output
(Maximum Average Power, 0.1% THD, 1KHz)		IMD (IHF):	<.05%, 8 ohms
Rated Per Channel, Both Channels Driven		Hum and Noise (20Hz - 20KHz unweighted):	-105dB from full output
2 ohms:	550 Watts RMS
4 ohm:	475 Watts RMS	Damping Factor:	>250, 8 ohm, <1kHz
8 ohm:	300 Watts RMS	Bandwidth:	100kHz
Mono Bridged:		Slew Rate:	50 V/µS
4 ohms:	1100 Watts RMS	Frequency Response:	±0.2dB 20Hz-20kHz
8 ohm:	950 Watts RMS	Rise Time:	2µS 10%-90%
		Full Power Input Sensitivity:	1.7V
(FTC Continuous Power, 0.1% THD, 20Hz - 20KHz)		Power Requirement:	110-125VAC, 50-60Hz (240V
Rated Per Channel, Both Channels Driven		Available)
Stereo (per channel):		Dimensions:	19”L x 5.25”H x 16.5”D
4 ohm:	400 Watts RMS	Shipping Weight:	46 lbs
8 ohm:	250 Watts RMS	Specification conditions are:	120VAC mains at 60Hz, 25° C
Mono Bridged:
8 ohm:	800 Watts RMS
Total Harmonic Distortion:
8 ohm:	.01% 1kHz
8 ohm:	.05% 20Hz
8 ohm:	.1% 20kHz

Rear Panel FTX-2001

Applications:

Churches, Studios, Concerts, Dance/Night Clubs, PA Systems, Auditoriums, Lecture Halls, Sports Stadiums, Outdoor Festivals

Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,

Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and

Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.

Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739

Internet: http://www.ashly.com, email: info@ashly.com