Ashly specifications Rear Panel MQX-1310 Applications

General Specifications MQX-1310		OUTPUT HUM AND NOISE:	< -92dBu (20Hz - 20kHz unweighted)
INPUT TYPE:	Active Balanced	CROSSTALK:	NA
INPUT IMPEDANCE:	20K ohm Balanced, 10k ohm	FILTER TYPE:	Constant Q/Wein Bridge
	Unbalanced	BANDWIDTH:	1/3 octave
MAX. INPUT LEVEL:	+23dBu	TOLERANCE:	±3%
OUTPUT TYPE:	Pseudo-Balanced*	RANGE:	±6 or ±15 dB
OUTPUT IMPEDANCE:	200 ohm Balanced, 100 ohm	SUBSONIC FILTER:	18dB/octave @ 40Hz, switchable
	Unbalanced	POWER REQUIREMENTS:
MAX. OUTPUT LEVEL:	+23dBu	Nominal Voltage:	90-125VAC, 50-60Hz,
CONNECTORS:	1/4” Phone jack, XLR and Barrier		(240VAC available)
	Strip	Minimum Voltage:	90VAC
FREQUENCY RESPONSE:	± .25dB	Power:	10W
TOTAL HARMONIC DISTORTION:	< 0.01% @ +20dBu	SHIPPING WEIGHT:	8 lbs
IM DISTORTION (SMPTE):	< 0.01% @ +20dBu	DIMENSIONS:	19”L x 1.75”H x 6”D

*Pseudo-balanced output is single ended signal with balanced impedance

Rear Panel MQX-1310

Applications:

Churches, Studios, Concerts, Dance/Night Clubs, PA Systems, Auditoriums, Lecture Halls, Sports Stadiums, Outdoor Festivals

Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,

Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and

Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.

Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739

Internet: http://www.ashly.com, email: info@ashly.com