28Advanced settings
Sharpness: changes the clarity of the edges of a video image. Select a sharp-
ness setting.
Color Space: This option applies to computer and component video
sources (except 480i/576i). It allows you to select a color space that has been
specifically tuned for the input signal. When Auto is selected, the projector
automatically determines the standard. To choose a different setting, turn
off Auto, then choose RGB for computer sources, choose either SMPTE240,
REC709 or REC601 for component video sources.
Color Temperature: changes the intensity of the colors. Select a listed
value, or select User and individually adjust the intensity of the red, green,
and blue colors.
Video Standard: when set to Auto, the projector attempts to automatically
pick the video standard based on the input signal it receives. (The video
standard options may vary depending on your region of the world.) If the
projector is unable to detect the correct standard, the colors may not look
right or the image may appear “torn.” If this happens, manually select a
video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
dard menu.
Active Iris: when on, the projector monitors the image brightness and mod-
ifies the light output if the image is dark, which improves black levels. In
Presentation mode, it looks at peak brightness, in Theater mode it looks at
average brightness.
Overscan: (video sources only) removes noise around the video image.
The following 4 options are for computer sources only (except M1-D signal):
Phase: adjusts the horizontal phase of a computer source.
Trac kin g: adjusts the horizontal scan of a computer source.
Horizontal / Vertical Position: adjusts the position of a computer source.
Sharpness
Color Space
Color Temperature
Video Standard
Active Iris
EDX Ref Guide.fm Page 28 Friday, June 30, 2006 10:48 AM