TROUBLESHOOTING, continued
Dishwasher does not drain properly | Dishwasher will not start |
♦ Make sure that the cycle was complete before you | ♦ Make sure the dishwasher is turned on and the door |
opened the dishwasher. If not, allow it to complete | is closed securely. |
and check again. | ♦ Check that the water supply is connected properly |
♦ Some water left in the sump area near the drain is | and the water is turned on. |
normal. | ♦ Make sure the power cord is properly plugged into |
♦ If the plumbing code in your area requires an air | the wall socket. |
gap, make sure that the air gap isn’t blocked or | ♦ Check your fuse box for a blown fuse or tripped circuit |
plugged. | breaker. |
♦ If the unit is connected to a garbage disposer, make |
|
sure the disposer is empty. |
|
♦ If water backs up into the sink, check the garbage |
|
disposer and trap for blockage. |
|
♦ Check the dishwasher filters and drain area for |
|
blockage. (See page 8.) |
|
♦ Check for a kink in the drain hose. |
|
Dishwasher does not fill properly
♦Make sure the water supply is turned on.
♦Make sure the dishwasher is turned on and the door is closed securely.
♦Check for crimps in the water feed line.
♦The system is designed to detect an overflow. When it does, it shuts off the inlet valve and circulation pump and turns on the drain pump. (See “Overfill Protection” on page 9.)
Page 12
